Speedy

The Speedy is the plane I designed for the original "fastest foamy" competition on Rcgroups and came in 2nd place at 138 mph.

The speedy in a normal configuration will go 90-100 mph but if you go extreme like I did it will go 138mph.

The Speedy is designed with the motor out front and because of this the motor shaft on most motors will need to be reversed.  Some times a little modification with a dremel is required to achieve this or a different shaft will need to be installed.

The specs:

Wingspan: 26"
Length: 21"
Flying weight: 10-11 oz's (Normal 3s setup)

Recommended power setup: (normal setup)

Motor: 3000-3500kv
Here are 2 I recommend but the shafts will need to be modified to flip them.  Turnigy 3400kv or Mystery 3000kv
Electronic speed control: 30 amp esc
Battery: 3s 1300mah lipo
Servos: 9 gram (2 req.)
Prop: 4.1x4.1 to 4.5x4.5 APC style prop

I have been able to get the Speedy up to 138mph using other power setups but it made the Speedy much heavier and is not recommended for novice pilots.  My thread on RCGroups.com  covers the other power setups I used to make it go faster.

The assembly of the Speedy is very easy due to the interlocking tab and slot construction.  The hinges are pre-beveled and the grooves for the carbon spars are milled out.

Kit contents:

Speedy kit contents

Build instructions:

Instructions

*Orders outside of the US are available. Email me for shipping quotes.  Warning they are usually more than the kit itself.

*Please note that the cart is not working properly and will not let you proceed with payment at the moment.  If you would like to place an order, please email me with what you would like to order until this gets fixed.  Thank you.

Product Options
Combination of product variants is not available
Quantity

Price: from $25.00

Loading Updating cart...
LoadingUpdating...

Comments are closed.